Parts finished according to plan

The cutting technique

Metal pipe cutting is an essential process in industrial manufacturing, offering with INOXTUBE remarkable precision with standard tolerances of ± 0.20 mm and the possibility of special tolerances up to ± 0.05 mm.

This operation can be performed for all lengths starting from 3 mm, thus meeting a variety of needs.

With a large production capacity of more than 10 million pieces per year, It guarantees manufacturing efficient and swift.

3 mm

Minimum length

± 0.20mm

±0.05 mm
Special tolerances

10 millions

Production capacity

The bending technique

Bending can be carried out using a digital or manual tool in cold, hollow or with a ball, and by rolling and on a mandrel. We produce small and medium series.

From Ø 2 mm to 18 mm outside

The drilling technique

Drilling consists in creating holes or openings in metal tubes using a drill or a specialized drilling machine.

This process starts with fixing the tube into the drilling machine and then the cutting tool, usually a drill or drill bit.

This machining action gradually removes material from the tube to form the desired hole. The diameter, depth, and position of the hole can be precisely controlled.

Drilling is widely used in various industries for applications such as passage of fluids, cables or other components through the tubes, as well as for the fixing or assembling parts.

The flare

Flaring is an industrial process used to widen the ends of metal tubes. This technique involves the use of specialized tools to gradually extend the ends of the tubes, creating a wider opening.

Flaring is often used to make it easier to assemble tubes with other components, improve fluid flow through tubes, or strengthen connections between parts.

This process can be carried out on various types of metal tubes and offers great flexibility to meet the specific needs of industrial applications.

The technique of shrinking

Shrinking is a process of transforming metal tubes that consists of: Rreduce the diameter of one end or a section of the tube using, in particular, coniferous trees.

This technique is used to create transition zones Or dimensional adjustments in tubes, making them suitable for specific applications such as assembly or connection with other components.

The restricted reinforces the structure of the tube and improves its mechanical resistance in the areas concerned.